Pneumatic automation,Pneumatic component,Air control-FENGHUA FLUID AUTOMATIC CONTROL
PRUDUCT LIST
Solenoid Valve 3 Way 5 Way
2 Way Solenoid Valve
Manual Operated Valve And Mechanical Valve
Pneumatic Flow Control Valve
Pulse Jet Valve
Air Hydraulic Pump And Hydraulic Cylinder
Pneumatic Vibrator
Pressure Switch And Flow Switch
Pneumatic Air Cylinder
Air preparation units
Pneumatic Tube Fitting
Pneumatic Tube
Pneumatic Automation Accessories
Product list >> All Products-FENGHUA FLUID AUTOMATIC CONTROL CO.,LTD

3/8-18NPT 10000PSI Foot Paddle Air Hydraulic Pump Oil usable 2.6L

*Air driven type,easily to operate by hand of foot *Operating pressure up to 10000PSI(70Mpa) *Oil reservior usable 2.6L,large capacity oil for power cylinder *With Aluminum casting air motor *With automatic relief valve for overload protection *With air nipple and hydraulic adapter

1.7L 3/8~18NPT 70MPa Air hydraulic pump For Rams,Presses,Hydraulic Puller

*Air driven type,easily to operate by foot *single acting for single acting cylinders *Operating pressure up to 10000PSI(70Mpa) *Aluminum casting air motor *Low noise,Low starting air pressure *With automatic relief valve for overload protection *With air nipple and hydraulic adapter

0.55L 3/8~18NPT 70MPa Air hydraulic pump For Rams,Presses,Hydraulic Puller

*Air driven type,easily to operate by foot *single acting for single acting cylinders *Operating pressure up to 10000PSI(70Mpa) *Aluminum casting air motor *metal reservoir usable oil 0.55L *With automatic relief valve for overload protection *With air nipple and hydraulic adapter

70mm,80mm 2~6Mpa Air Pump For Air Over Hydraulic Jack 1/4~1/2”

*AP Series air pump for air over hydraulic jack *Aluminum alloy body material *Bore size 70mm,80mm *Stroke according to requirement *Mickey mouse barrel,round barrel with tie-rod for option *Air supply pressure 2~6Mpa *Port size 1/4”,3/8”,1/2” G,NPT for option *Working termperature:0~60℃

700Bar RCH Single Acting,Hollow Plunger Hydraulic Cylinder 13~100Ton

*Hollow plunger design allows pulling and pushing application *Low profile and longer strokes fit in the tightest space *Withstands full”Dead-end” loads *Collar threads for easy fixturing *Stop ring for piston below-out protection *3/8-18NPT female coupler&Dust cap

Low Height Hydraulic Cylinder Capacity 10~100Ton

*Low height hydraulic cylinder application the most widely range *Mounting holes permit easy fixturing *Grooved plunger ends require no saddle *Maximum sized springs speed up piston retrun *Stop ring for piston below-out protection *Come with 3/8-18NPT female coupler&Dust cap

Low Height Flat Hydraulic Cylinder capacity 5~150Ton

简介 *Compact and flat design for use where in a narrow space *Mounting holes permit easy fixturing *Grooved plunger ends require no saddle *Maximum sized springs speed up piston retrun *Stop ring for piston below-out protection *Come with 3/8-18NPT female coupler&Dust cap

700Bar Low Height, Flat Multi-stage Hydraulic Cylinder Capacity 10~100Ton

*Multi-stage design,realize long stroke lifting in narrow space in one time *Mounting holes permit easy fixturing *Maximum sized springs speed up piston retrun and increase spring life cycle *Stop ring for piston below-out protection *Come with 3/8-18NPT female coupler&Dust cap

GT-8 Pneumatic Turbine Vibrator 1/8” 2910N At 6Bar

*Body material Extruded Aluminium Alloy *Inlet and exhuasting port size 1/8”G,NPT *Working frequence and centrifugal force adjustable by air pressure *High frequence up to 46000cycles/Minute at 6 Bar *Centrifugal force up to 2910N *Low noise 60~75Dba *High temperature-resistance up to 120℃

GT-10 Pneumatic Turbine Vibrator 1/8” 2400N At 6Bar

*Body material Extruded Aluminium Alloy *Inlet and exhuasting port size 1/8”G,NPT *Working frequence and centrifugal force adjustable by air pressure *High frequence up to 37500cycles/Minute at 6 Bar *Centrifugal force up to 2400N at 6Bar *Low noise 60~75Dba *High temperature-resistance up to 120℃

GT-13 Pneumatic Turbine Vibrator 1/4” 3730N At 6Bar

*Body material Extruded Aluminium Alloy *Inlet and exhuasting port size 1/4”G,NPT *Working frequence and centrifugal force adjustable by air pressure *High frequence up to 33000cycles/Minute at 6 Bar *Centrifugal force up to 3730N at 6Bar *Low noise 60~75Dba *Easy to change bearing parts

GT-16 Pneumatic Turbine Vibrator 1/4” 3160N At 6Bar

*Body material Extruded Aluminium Alloy *Inlet and exhuasting port size 1/4”G,NPT *Working frequence and centrifugal force adjustable by air pressure *High frequence up to 24000cycles/Minute at 6 Bar *Centrifugal force up to 3160N at 6Bar *High temperature-resistance up to 120℃

< | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | >


   

 ©CopyRight FENGHUA FLUID AUTOMATIC CONTROL CO.,LTD
TEL:+86-574-88871069 FAX:+86-574-88882296 EMAIL:info@air-matics.com
ADD.:XIKOU ZHONGXING(E) ROAD 315502 NINGBO CHINA. CODE:315502